Engineered for Controlled Environments

SBB Cell Fan (Nominal 3000 CFM) Product Data
Features:

 

  • Aluminum frame construction allows for a light weight and durable finished product.
  • Fan and motor mounting system includes integral vibration isolators.
  • Assembled unit is factory tested both at the motor and the outer frame for vibration at 3-axis to meet.
  • ANSI / AMCA 204-05 Balance Quality and Vibration Levels for Fans.
  • Variable Frequency Drive (VFD) provided, ships loose, available in (208-230V) or (460V) options.
  • The VFD is pre-programmed and configured for startup upon being powered and provides a simple means for speed (Hz) adjustment to allow ease of system air balancing.
  • The VFD is provided with a NEMA 1 kit to safely cover the power terminals at the bottom of the drive in wall mount applications.
  • NEMA 1 lockable disconnect is mounted to the frame and pre-wired to the fan motor.
  • Integral 3/8-16 fasteners are provided at each bottom corner (x4) of the frame for hanging the unit via strut and threaded rod (strut and threaded rod provided by others).
  • Sikaflex 1a construction sealing compound used in place of Silicone sealing compounds (cut sheet and MSDS available upon request).
  • (Optional) 4x4 ceiling tile mounting plate available, optional materials and finishes available, this optional plate allows the unit to be set into and supported by one of the SBB grid systems eliminating the need for hanging.

 

  • Totally Enclosed Fan Cooled (IP54 Rating)
  • NEMA Premium Efficient Ratings
  • 3 Phase, 60 Hz, 208-230/460V
  • 1.15 Service Factor – Continuous
  • Greased for life shielded bearings
  • (Optional) sealed bearings available
  • (Optional) bearing protection ring available

 

 

 

  • High efficiency plenum wheel allowing for a smaller fan without increasing power requirement.
  • Maximum wheel speed of 1200 RPM (standard) allows for quiet unit operation.
  • Correct rotation direction marking provided.
  • Wheels pre-balanced and adjusted for optimal operation and low vibration.
  • (Optional) Piezometer ring available for airflow measuring systems.
Motor Features: Plenum Fan Features:

* 1.5 HP Motor Full Load Amps:

- 208 V: 5.59 A

- 230 V: 5.06 A

- 460 V: 2.53 A

(Wiring will be minimum 14 AWG)

(Required short circuit protection to be provided by others)

 

** Assembled weight:

- w/o ceiling tile mounting plate: approx. 245 lbs

- w/ ceiling tile mounting plate: approx. 300 lbs

SBB Cell Fan (Nominal 5000 CFM) Product Data
Features:

 

 

  • Aluminum frame construction allows for a light weight and durable finished product.
  • Fan and motor mounting system includes integral vibration isolators.
  • Assembled unit is factory tested both at the motor and the outer frame for vibration at 3-axis to meet ANSI / AMCA 204-05 Balance Quality and Vibration Levels for Fans.
  • Variable Frequency Drive (VFD) provided, ships loose, available in (208-230V) or (460V) options.
  • The VFD is pre-programmed and configured for startup upon being powered and provides a simple means for speed (Hz) adjustment to allow ease of system air balancing.
  • The VFD is provided with a NEMA 1 kit to safely cover the power terminals at the bottom of the drive in wall mount applications.
  • NEMA 1 lockable disconnect is mounted to the frame and pre-wired to the fan motor.
  • Integral 3/8-16 fasteners are provided at each bottom corner (x4) of the frame for hanging the unit via strut and threaded rod (strut and threaded rod provided by others).
  • Sikaflex 1a construction sealing compound used in place of Silicone sealing compounds (cut sheet and MSDS available upon request).
  • (Optional) 4x4 ceiling tile mounting plate available, optional materials and finishes available, this optional plate allows the unit to be set into and supported by one of the SBB grid systems eliminating the need for hanging.
Motor Features: Plenum Fan Features:

 

 

  • Totally Enclosed Fan Cooled (IP54 Rating)
  • NEMA Premium Efficient Ratings
  • 3 Phase, 60 Hz, 208-230/460V
  • 1.15 Service Factor – Continuous
  • Greased for life shielded bearings
  • (Optional) sealed bearings available
  • (Optional) bearing protection ring available

 

 

 

  • High efficiency plenum wheel allowing for a smaller fan without increasing power requirement.
  • Maximum wheel speed of 1200 RPM (standard) allows for quiet unit operation
  • Correct rotation direction marking provided.
  • Wheels pre-balanced and adjusted for optimal operation and low vibration.
  • (Optional) Piezometer ring available for airflow measuring systems.

* 2 HP Motor Full Load Amps:

- 208 V: 6.63 A

- 230 V: 6.00 A

- 460 V: 3.00 A

(Wiring will be minimum 14 AWG)

(Required short circuit protection to be provided by others)

 

** Assembled weight:

- w/o ceiling tile mounting plate: approx. 290 lbs

- w/ ceiling tile mounting plate: approx. 340 lbs

Home    |    Products & Components    |    About SBB Inc.    |    Modular Cleanroom Packages    |    Special Services

Marketing Downloads    |    SBB Testing & Certification Plus    |    Contact Us

Sales & Service: 89 Turnpike Rd. Ipswich, MA 01938     |    Ph: 1.978.356.2200

Manufacturing: 1 GM Drive Suite 5 Syracuse, NY 13206    |    Ph: 1.315.437.6500

©SBB, Inc., All Rights Reserved.     Contact Us